Cairns Beacon C8 Replacement - 2015

The Queensland Government is seeking tenders to undertake the Cairns Beacon C8 Replacement works.

The major items included in the Works are as follows:

1. Supply and fabricate 610 mm diameter x 12.7 mm thick mild steel pile.
2. Transport pile to work site.
3. Handle, pitch and drive 610 mm diameter pile.
4. Supply, fabricate and galvanise pile cap.
5. Cut pile at correct height and install weld-on pile cap.
6. Supply and install Denso Steelcoat 100 protection system or approved equivalent to pile cap and pile cap splice weld.
7. Supply and install Denso Seashield 2000FD pile protection system or approved equivalent.
8. Supply, fabricate and install 1400 mm diameter work platform, port lateral daymark complete with platform mounted daymark frame and lamp stand.
9. Supply, fabricate and install galvanised steel ladder, complete with clamps to the orientation on the beacon as shown on the Drawings.
10. Supply, fabricate and install beacon identification sign.
11. Supply all fasteners including aluminium bolts, u-bolts, nuts and washers; Grade 316 stainless bolts, nuts and washers; galvanised mild steel bolts, nuts and washers; and all bolt insulation products.
12. Remove and dispose of the existing pile and the wreckage lying on the sea bed which consists of the existing work platform, lamp stand, navigation light, ladder sections and possibly some ladder clamps.

This contract does not include:

1. The supply and installation of the navigation light.

For detailed information on the specific goods / services sought under this tender, please review the Specification in Section 5 of the tender document.