Slickline Services - Stage 2B Project - CAN-P24-7457

Goods or services supplied

The rig-based completion program is expected to commence from March 2026 (exact timing to be confirmed pending availability of workover rig). The two-well completions program is estimated to take approximately 22 days in total for the campaign, with six (6) days per well and allowing for one inter-well move and initial campaign mobilisation and end of campaign demobilisation, which may require slickline services assistance to deploy/retrieve downhole slickline plug for packer setting and/or packer pressure testing. Once completions have been installed, a well test equipment package will be mobilised once workover rig is moved off well location and each well will be flow tested consecutively over April to June 2026. The well test approach will utilise an ESP to flow water to surface while monitoring of pressures and flow rates to establish reservoir characteristics (assuming no gas or hydrocarbons are present in the well stream). It is anticipated that each zone in the well may be selectively flow tested for up to 10 days each with an overall well test duration on each well of approximately ~30 days per well. Slickline services will be required throughout the well testing duration to open and/or close SSDs accordingly as required to flow test each zone of interest. Supplier is to provide all equipment, materials and personnel for the provision of services required to complete the wells with a design and operational plan as detailed in the Technical Scope.